For ASTM D91 - ASTM D96 – ASTM D893 – ASTM D1796 - ASTM D2273 – ASTM D2709 – ASTM D2711 – ASTM D4007 – ASTM D5546 - API 2542 - API 2548 - BS 4385 - ISO 3734 - ISO 9030 - IP75 IP359 - NFMO7-020. The centrifuge is specially designed for water and sediment determination, as well as characterization of used oils and petrol features as demulsibility and precipitation. A choice of accessories for spin cylinder/conical tubes of 6 and 8 inches, pear/shaped of 6 inches as well as finger tubes of 12.5 ml.

• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalance location system (ULS)
• Real RCF values on screen based on accessories configuration
• Count up/down from “0” or at “set RPM/RCF” for test reproducibility
• Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests
• Timer from 1 sec. to 99 hours programmable in 1 sec. steps and hold position
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation
• ULS: Unbalance location system indicating on the screen the number of the bucket which produces the unbalance switch off
• Start delay to program when the cycle should begin

The lid is provided with security systems:

• Automatic lid lock system, motorized with double lock.
• Emergency lid-lock release.
• Locking and protection against opening along the run
• Lid dropping protection
• Port in the lid for calibration and operation checking

The centrifuge is available in the following voltages/frequencies:

• Centrifuge 220-240V/50-60Hz (P/N: 31T0200)
• Centrifuge 110-120V/50-60Hz (P/N: 31T0220)