Tamson ASTM D892 Foaming Dual Bath

The Tamson foaming dual bath can be used to test the foaming characteristics of lubrication oils conform ASTM D892. The apparatus comes with two baths that can interchangebly be operated at 24°C and 93.5°C. With the two baths, a rack with four flowmeters is standard supplied. Each bath has four openings for foaming cylinders. The rack can be used to hold up to four foaming cylinders, for example between sequence II and III of the test method. Also, the stoppers and optional dryer can be mounted on this rack. The baths are equipped with a metal case for safe operation of the foaming baths. Furthermore, the baths offer an excellent temperature stability and have a drain for easy draining of the bath fluid. Tamson can supply all accessories needed for foaming tests according to ASTM D892.

Custom-made configurations are available on request, for example when a comined apparatus for ASTM D892 and ASTM D6082 is needed. Also, optionally, a Digital Mass Flow Meter (DMFM) can be offered.

The Tamson ASTM D892 Foaming Dual Bath is available in the following voltages/frequencies:

  • Tamson Foaming Dual Bath 230V/50-60Hz (P/N: 00T0330)
  • Tamson Foaming Dual Bath 115V/60Hz (P/N: 00T0331)
SKU
00T0330
Send e-mail for price

The Tamson foaming dual bath can be used to test the foaming characteristics of lubrication oils conform ASTM D892, IP 146 and ISO 6247. The apparatus comes with two baths that can interchangebly be operated at 24°C and 93.5°C. Both baths are equipped with two cooling coils and both baths have four openings for foaming cylinders. Also, the bath is equipped with a drain, and a seperate opening to fill the bath fluid when a foaming cylinder is removed. The stirrer in the bath has a long shaft to ensure an excellent temperature uniformity in the bath. The setup is supplied with a rack that can be used to hold up to four foaming cylinders, for example between sequence II and III of the test method. The setup is supplied with four flowmeters, these flowmeters are calibrated at 94 mL/min. Also, the stoppers and optional dryer can be mounted on this rack. The stoppers are made of Delrin, to prevent cracking of the stopper over time. The apparatus is standard delivered with two foaming baths, one rack with four flowmeters, four foaming cylinders, four stoppers and tubing. The bath conforms to CE regulation. It is further equipped with a mechanical resettable safety thermostat and a float, to warn the user when the level of the bath fluid has become too low.

Main Features:
  • Up to four positions per bath
  • Drain valve to empty bath content
  • Stirrer with long shaft for optimal temperature uniformity
  • Delrin stoppers to prevent cracking of the stoppers over time
  • Seperate opening to add bath fluid
  • Metal case with removable windows for save operation
  • Each bath is equipped with two cooling coils
  • Rack with clamps to overcome buoyance of the foam cylinders
  • Extreme temperature stability

The Tamson ASTM D892 Foaming Dual Bath is available in the following voltages/frequencies: 

  • Tamson Foaming Dual Bath 230V/50-60Hz (P/N: 00T0330)
  • Tamson Foaming Dual Bath 115V/60Hz (P/N: 00T0331)
More Information
SKU 00T0330
Bath Accuracy 0.02°C
Bath Volume Up to 31L per bath
Height 710 mm
Width 430 mm
Length 380 mm
Minimum Temperature +20°C
Maximum Temperature +100°C
Manual click here
Specification click here