Silver Corrosion Bath

This test method specifies the determination of the corrosive tendencies towards silver of aviation turbine fuel, automotive spark-ignition engine oils or automotive gasoline. The result is classified as an integer in the range 0 to 4. The bath offers place for six test positions. The temperature range is from ambient +5°C to 250°C. Optional is a cover with nine holes to test nine samples (P/N 03T2313)
The bath can also be used for copper corrosion tests, please see our specification sheet for ASTM D130 and related methods.
The insulation of the bath and electronic design result in a very stable working temperature of ± 0.02°C. The set point can be set in steps of 0.1° in the range of 0°C up to 250°C (-148..482°F). The accuracy on the display is displayed in 0.1°C. However the controller has an internal accuracy of 0.01°C.
Standard available in °C, on request in °F. When not used for silver corrosion tests, the pump can be used to circulate the bath content to an external application.
The bath conforms to CE regulation. It is further equipped with a mechanical resettable safety thermostat. An aternative set-up can be realised using a TC40 bath with a cover for 18 positions (P/N 03T2313).

The silver corrosion bath can be used for tests according to ASTM D7667, ASTM D7671, IP 227, ASTM D4814 and IP 611.

The Silver corrosion bath is available in the following voltages/frequencies:

• Silver corrosion bath 230V/50-60Hz (P/N: 31T0671)
• Silver corrosion bath 115V/60Hz (P/N: 31T0861)