TC40 Copper Corrosion Bath 63 positions

The TC40 copper corrosion bath offers 63 positions for the glass test tube for copper corrosion tests. The bath is an excellent solution for users that run a lot of copper corrosion tests or test the copper corrosion over a long period of time. Tamson can deliver all necessary accessories for copper corrosion tests according to ASTM D130. The TC40 is maintenance-free and very robust. The TC40 is used for precise temperature control and offers high reliability for use under rough circumstances. The insulation of the bath and electronic design result in a stable working temperature of ± 0.02°C. The set point temperature can be set in steps of 0.1°C in the range of 0°C up to 250°C (32°F..482°F). The accuracy on the display is displayed in 0.1°C. However the controller has an internal accuracy of 0.01°C. This two decimal-readout also is available from the optional RS232 and the free Tamcom software. The bath is equipped with a cooling coil for counter-cooling. The bath conforms to CE regulation. It is further equipped with a mechanical resettable safety thermostat and a drain to empty the bath.

Main Features:

• 63 positions for test tubes.
• All accessories can be delivered by Tamson
• Suitable for internal and external applications
• Stainless steel, robust bath
• Easy to read display
• Very quiet
• Easy switching between internal and external circulation
• Insulated bath provides extreme temperature stability
• Integrated cooling coil for counter-cooling
• Bath drain

The TC40 is available in the following voltages/frequencies:

• TC40 230V/50-60Hz (P/N: 00T0681)
• TC40 115V/60Hz (P/N: 00T0851)