TC16 115V-60Hz

Tamson bath/circulator TC16, 115V-60Hz. Bath volume is 16 L. Temperature range is from ambient to 250 C. Temperature stability is better than +/- 0.02 K. Bath opening 180 x 210 mm. Bath is made from stainless steel. A bath drain, lid and cooling coil to work below ambient are standard included.
SKU
00T0861
€2,665.00
More Information
Bath Temperature Accuracy 0.02 K
Bath Volume 16 litre
Bath Height 480
Weight 40.0000
Specification click here
Manual click here
Minimum Temperature 20 C
Maximum Temperature 250 C
Tamson bath/circulator TC16 with a bath volume of 16 L. Temperature can be set from ambient up to 250 °C. Temperature stability is better than +/- 0.02 K. Bath opening 180 x 210 mm. Bath is made from stainless steel. The TC16 is used for precise temperature control offers high reliability for use under rough circumstances
The insulation of the bath and electronic design result in a stable working temperature of ± 0.02°C. The set point temperature can be set in steps of 0.1°C in the range of 0°C up to 250°C (32°F..482°F). The accuracy on the display is displayed in 0.1°C. However the controller has an internal accuracy of 0.01°C. This two decimal-readout also is available from the RS232 and the free Tamcom software.
The temperature reading atandard is available in °C, on request in °F. These baths can be operated from ambient up to 250°C (41°F..482°F). Due to the "self-heating" of the stirring mechanism and when using a top lid, the minimum temperature lies approximately 5°C above the ambient temperature. When using the standard built-in cooling coil the minimum operating temperature lies approximately ±5°C above the temperature of the cooling liquid circulating inside the cooling coil. Minimum working temperature when using external cooling lies around 10°C. Lower temperatures generate problems with built up of condensate in the inner insulation of the bath.
The bath conforms to CE regulation. It is further equipped with a mechanical resettable safety thermostat and a drain to empty the bath.